Ridge finish
Eave and ridge details are finished to complete the system.
Tile Roofing
Tile Roof Installation South Orange, NJ
Tile roof installation in South Orange covers more than the tile: the framing check, underlayment, battens, fasteners, flashing and ridge all decide how long the roof lasts. Call (973) 858-1859 to reach a local roofer who installs tile.
Before any tile goes up, the question is whether the house can hold it. Clay and concrete tile weigh far more than shingles, so homes framed for a lighter roof often need a structural review and sometimes added framing. Houses designed for tile already account for that load in their framing.
Then comes choosing the tile itself. Clay holds its color through the whole tile and lasts for generations, and concrete tile is heavier, more absorbent and offers a wide range of shapes and finishes. Shapes range from flat and low profile tile to high profile S tile and traditional barrel tile.
What lasts is the system under the tile. Slope matters too: tile generally needs at least 2.5 in 12, and slopes under 4 in 12 need a double layer of underlayment. Picking a durable underlayment at the start pushes the first relay decades down the road.
Depending on what the roofer finds, tile roof installation in South Orange, NJ can go hand in hand with tile roof replacement and roof installation.
Dealing with this in South Orange, NJ right now? Call (973) 858-1859 to talk to a local roofer.
Call nowThe process
How tile roof installation works
A tile roof goes on in layers, and the tile is the last of them.
Check the structure
The job starts with the structure: span tables or an engineer confirm the framing, and the building permit is secured. It is smart to keep a stack of spare tile from the same batch for future repairs.
Dry in the roof
Decking is checked and fastened, drip edge goes on, and the deck is covered with the chosen underlayment, with self-adhered membrane in valleys and at eaves where ice or wind-driven rain is a concern. Since this layer does the waterproofing, it is where quality matters most.
Set the battens
Horizontal battens give each row of tile something to hang on and set the exposure of every course. Some systems skip battens and fasten tile directly, depending on the profile and the slope.
Install flashing
Flashing goes in at valleys, sidewalls, headwalls, skylights and pipes, sized for the deep profile of tile. Flashing for tile is built for the depth of the tile, which is why shingle flashing details do not carry over.
Fasten each course
Courses are laid from the bottom up, starting over a raised eave or bird stop, and every tile is fastened to resist uplift. Cut tiles at hips and valleys are fastened too, since small pieces are the first to blow off.
Finish the ridge
Ridge and hip caps are set on a raised ridge board, either in mortar or with a dry ridge system and a vented closure that lets attic air out. The roof is cleaned, broken pieces are replaced and spares are left with the owner.
What is included
What tile roof installation includes
Valley metal
Wide valley metal and shaped wall flashings are installed so water stays on top of the underlayment.
Load check
Rafters or trusses are confirmed before tile is ordered so the roof does not sag over time.
Waterproof layer
The deck is covered with underlayment suited to the slope before any tile goes on the roof.
Tile attachment
Each tile is secured to the deck or battens so tiles stay put in strong wind.
Related service
Barrel Tile Roof Installation South Orange, NJ
Barrel tile is the classic two-piece tile roof: half-round pan tiles laid concave side up, with cover tiles laid over the joints between them. Their tapered shape and deep profile create the rolling texture that defines the style. Because of that depth, barrel tile needs careful work at the eaves, hips and ridges, where the open curves must be closed off.
Barrel tile roof installation in South Orange calls for extra attention to fastening, since cover tiles sit high and catch wind. Pans and covers have to run in straight lines with even exposure, which takes careful layout before the first pan goes down.
Related service
Spanish Tile Roof Installation South Orange, NJ
Spanish tile, also called S tile, merges the curved pan and cover into one interlocking piece. Both clay and concrete versions are made, in solid colors or blends from deep red to earth tones. Its interlocking side laps shed water well, but the curved ends at eaves and ridges still need closing off.
Spanish tile roof installation in South Orange follows the same system as any tile roof, from structure check to underlayment, flashing and tile. Flashing around chimneys, walls and skylights has to be shaped to the S curve, often with formed metal or a flexible flashing material. If you choose a blend, the roofer mixes tile from several pallets at once to spread the color evenly.
Local help
Tile Roof Installation Near Me
Tile roofs in South Orange go onto newer homes built for them and onto older homes where owners are switching from shingles. In South Orange and neighboring communities including Vauxhall, East Orange, Union and Short Hills, the biggest variable on a conversion is whether the existing framing can carry tile, while homes already built for tile can usually go straight to choosing a profile and color.
For tile roof installation in South Orange, NJ or nearby towns like Vauxhall, East Orange, Union and Short Hills, call (973) 858-1859 to reach a roofer who covers your street.
What the local climate does to a roof
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, building ice dams that push water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. Most homeowners in South Orange, NJ have the roof checked in the fall and again after the snow melts.
Why call
Why fix it now
Less damage
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Familiar with local homes
Roofers in South Orange know the roof types and weather wear common in local homes.
Clear next steps
Ask the roofer about the cause, the options and the estimate before work starts.
Tile Roof Installation questions
Which underlayment is best for tile?
Tile roofs use heavy felt, synthetic underlayment or self-adhered membrane, sometimes in two layers. Since the tile can outlast the underlayment by decades, a longer lasting underlayment pays off. On slopes below 4 in 12, code requires two layers.
How heavy is a tile roof?
A tile roof is far heavier than a shingle roof, and concrete tile tends to weigh more than clay. Whether a given house can carry it depends on the framing, which is why conversions from shingles start with a structural review. Lightweight concrete tile is an option for some homes that fall short of the load for standard tile.
How long does it take to put on a tile roof?
A typical home takes longer than a shingle roof, often one to a few weeks depending on size, complexity and weather. Steep pitches, many hips and valleys and a structural upgrade all add time. The roof is dried in with underlayment early, so the house is protected while tiling continues.
Can tile be installed over an existing roof?
The old roofing is torn off before tile is installed. That lets the roofer check the sheathing, replace soft spots and lay a proper underlayment.
Should I choose clay or concrete roof tile?
Both make durable roofs with different tradeoffs. Fired clay holds its color, weighs a bit less and has the longest track record. Concrete offers a huge range of styles, but it is heavier than clay and fades as it ages.
More questions? Call (973) 858-1859
Related services
Tile Roof Replacement
Full tile roof replacement when the underlayment, fasteners or tile have reached the end of their life, with salvage of good tile wherever it makes sense.
Learn moreRoof Installation
Putting on a new roof the way the material maker intends, so it sheds water at every edge and seam.
Learn moreTile Roof Inspection
An inspection of a tile roof from the ridge to the attic, with a written report of what needs attention now and what can wait.
Learn moreRoof Ventilation
Roof ventilation work that keeps the attic dry in winter and cooler in summer, based on what the attic actually needs.
Learn more
Looking for something else?
See all roofing servicesGet tile roof installation help in South Orange
Call (973) 858-1859 for a local roofer in South Orange and nearby towns.